#Hidden blade assassin creed 3 how to

Dremel Tool and Metal Cutting Disks вЂ“ You will use these for cutting and modifying the draw slide parts.

String/Cord вЂ“ Pick something strong but light, kite string or the inner strands of paracord work very well.

Ring вЂ“ Pick something that fits either your middle or ring finger.

They can be purchased from Tandy Leather or Michaels Crafts.

Rapid Rivets вЂ“ These are used to attach the blade mechanism to the bracer.

Button Snaps вЂ“ These can be purchased from retailers such as Tandy Leather or Michaels Crafts.

Leather Dye вЂ“ For coloring and finishing your leather, if you use repurposed leather from an old suitcase or coat you wonвЂ™t need this.

leather вЂ“ This can be purchased at leather suppliers such as Tandy Leather, however you can also use leather from an old suitcase or coat to cut down on cost. you can purchase rubber washers in various shapes and sizes at hardware stores, you do not need to have the exact one pictured, just something similar.

Rubber Washer вЂ“ when the blade retracts it retracts with a lot of force, this will be used to dampen that force i.e.

Small Nails вЂ“ These will be cut and turned into rivets to attch the blade lock in step 5.

YouвЂ™ll just have to drill your holes based on the size of bolts you are using.

Assorted small nuts, bolts, and washers вЂ“ The size of the nuts, bolts, and washers doesn't really matter, anything around 1/8вЂќ will do fine.

you can make this component out of an hacksaw blade, simply cut off a three inch piece of the blade and grind away the teeth.

Flat Spring вЂ“ This will hold the blade in place when it is extended.

I purchased mine from Lowes home improvement store as part of a variety pack of springs for around 3 dollars. It needs to have very light pull strength and should be 3 to 4 inches in length and approximately 1/4' in diameter.

Small Coil Spring вЂ“ This spring will be what retracts the blade when it is extended.

Cost $12, purchased at local flea market. The blade I used came very dull with smooth rounded edges, if yours is sharp or pointy I highly advise that you sand away the edges so that they are nice and dull, this will make it safer to use and may keep you out of trouble. To get the blade, dismantle the dagger and discard the handle, pommel, and cross guard components. These measurements, especially the 1/8' thickness, are important because there is not a lot of clearance between the moving parts of the hidden blade so be prepared to do some file work to make things fit. the measurements of the blade are 10.5'long, 3/4' in width at the widest point, and 1/8' in thickness.

Replica Blade вЂ“ I used a replica WWII dagger for this.

examine the included picture for product details. It is important that you get exact same one that I used otherwise the measurements won't work out properly. You can purchase this from home improvement stores like Lowes or Home Depot for about $6.

16вЂќ Drawer Slide вЂ“ This will be what holds the blade and allows it to extend and retract.

Materials: Hidden Blade Mechanism Materials List:

Building the blade mechanism (Steps 2-6).

The process of making the Hidden Blade can be broken down into two main parts:

I didn't want it to require a lot of special parts or tools.I wanted it to look as nice as possible and as real as possible.I wanted the Hidden Blade to be functional, (to either extend or retract by moving my hand or wrist).Don't be intimidated by the number of steps involved, this is a fun project that should only take you a few days in your workshop and should only cost you around 30 or 40 dollars.

#Hidden blade assassin creed 3 how to

In this Instructable I will be teaching you how to build a working replica of the Hidden Blade from the Assassin's Creed video game series.